Interior starting to go in
Author
Message
- Offline
- Contributing Member
- Posts: 46
- Joined: Sun Jan 11, 2015 7:37 pm
- Travco Model: 1966 Model 270
- Location: Birmingham, AL
Re: Interior starting to go in
I like this floor material. Do you have a manufacturer and style no?
- Offline
- Site Admin
- Posts: 1233
- Joined: Wed Nov 19, 2014 2:26 pm
- Travco Model: 76 Mahal 2+2
- Location: Arnoldsville GA
- Contact:
Re: Interior starting to go in
I got it from Lumber liquidators. Venetian Cream 5mm vinyl laminate.\nhttp://www.lumberliquidators.com/ll/c/Venetian ... 00\n\nThey also have a couple other colors/ patterns in the vinyl.
- Offline
- Senior Contributor
- Posts: 629
- Joined: Fri Feb 21, 2014 10:32 am
- Travco Model: 270
- Location: Ohio
Re: Interior starting to go in
After looking at some great pics, I happen to notice a slight problem I\nwould like to point out. At each person's option of course... \nI have two golden retrievers which I place above a lot of things...\npoint being...the entrance steps on my Travco have outdoor carpeting on the steps.\nBeing perforated or expanded metal or whatever you wanna' call it...\nyour pets nails could get caught in the openings and possibly be ripped out.\nThe black carpeting on (mine) prevents this...FWIW/ just my $.02 worth...\nBBB
- Offline
- Regular Member
- Posts: 14
- Joined: Sat Sep 17, 2016 9:42 am
- Travco Model: 1972, 270 Rear Dinette
- Location: Kentucky
- Contact:
Re: Interior starting to go in
Thanks for sharing your pictures. It's not the 1970s style but it looks good with the elements you changed and that can be hard to pull off. Where did you find your bench seats?
- Offline
- Site Admin
- Posts: 1233
- Joined: Wed Nov 19, 2014 2:26 pm
- Travco Model: 76 Mahal 2+2
- Location: Arnoldsville GA
- Contact:
Re: Interior starting to go in
The Bench seats for the Dinette are out of a 1969 Travco and fold down to a bed. I got those from someone on the Travco lovers site on facebook.
- Offline
- Senior Contributor
- Posts: 629
- Joined: Fri Feb 21, 2014 10:32 am
- Travco Model: 270
- Location: Ohio
Re: Interior starting to go in
It is identical to the one i installed also. it has a sd card slot besides a usb slot and two shafts like the original setup.\nit is a PYLE brand. an earlier ordered radio had an updated single shaft that i gave away and ordered this version. much better.\nand if i remember the price was in the $30.00 something range.. a affordable replacement...HTH/FWIW\n10/30/16\nBBB.