Part#s Sticky
Author
Message
- Offline
- Moderator
- Posts: 1034
- Joined: Wed Nov 19, 2014 2:26 pm
- Travco Model: 76 Mahal 2+2
- Location: Arnoldsville GA
- Contact:
Re: Part#s Sticky
Brake Rotor for the M500\nCentric Parts 120.67010\nThe dimensions are the same as the KIC 666-13380 that has been listed here previously and it is available through Amazon.\nI saved a few bucks by ordering from Amazon themselves as I was just stocking spares. It took them a month to get the first one and the second one is due here Monday. Others sellers also have them for about 20 bucks more but they are in stock.\n\nhttps://www.amazon.com/gp/product/B001BFTVBW/re ... UTF8&psc=1
- Offline
- Regular Member
- Posts: 19
- Joined: Fri Jun 26, 2015 11:48 am
- Travco Model: 270
Re: Part#s Sticky
I know this thread is old, but I never saw a post that Definitively says that the Centric 130.83006 master cylinder will work on Late M375 chassis. MY 1972 Dodge Travco. \n The casting on the new master is 30042-C. The only difference I see is that the Front port will need a 1/2" to 7/16" adapter. (I saw a thread where someone paid $400+ dollars from Alretta that had this exact casting with the adapter) I paid $180. I am installing it this weekend and i'll report back if it works. \n Sean
You do not have the required permissions to view the files attached to this post.
- Offline
- Regular Member
- Posts: 19
- Joined: Fri Jun 26, 2015 11:48 am
- Travco Model: 270
Re: Part#s Sticky
The Brakes seem to be working fine after replacing the new master cylinder rod with the old one. So the Centric part # is correct for the M375 late chassis.
- Offline
- Senior Contributor
- Posts: 134
- Joined: Sun Dec 24, 2017 1:37 pm
- Travco Model: 1972 270
Re: Part#s Sticky
Was looking for exact rear inner seal for 71 axle on the m375\nI called Rancho Chrysler, and they had the old books!\nOEM# 2914518, used 1967 to 1980\n\nTimken National Seals 456648\nNitrile Oil Seal - 45 Design, Single Lip with Spring, 3.3125 in Shaft, 4.5060 in OD, 0.4690 in Width\n\nthe SKF 33136 is a little thinner, but would be OK\nSKF Sealing Solutions 33136\nNitrile Oil Seal - CRWH1 Design, Single Lip with Spring, 3.3125 in Shaft, 4.5000 in OD, 0.4375 in Width\n\nDave's has the same OEM under M500 at\nhttp://dave78chieftain.com/DodgeHdw.htm\n\nnat 4566498 is the same dimensions as 415085 (listed at Oreilly), which has double lip for dust resistance\nhttps://shop.advanceautoparts.com/.../national.../18443326-P\nand is what I ordered.
- Offline
- Senior Contributor
- Posts: 134
- Joined: Sun Dec 24, 2017 1:37 pm
- Travco Model: 1972 270
Re: Part#s Sticky
FYI, I posted a PDF of much of the 69-74 parts catalog in \nhttp://www.travcoforum.com/download/file.php?id=2454