Part#s Sticky

Post here for Brake System related Discussion
Author
Message
Offline
Moderator
Moderator
Posts: 1034
Joined: Wed Nov 19, 2014 2:26 pm
Travco Model: 76 Mahal 2+2
Location: Arnoldsville GA
Contact:

Re: Part#s Sticky

Unread post by KB2CRK » Wed Sep 28, 2016 8:29 am

Brake Rotor for the M500\nCentric Parts 120.67010\nThe dimensions are the same as the KIC 666-13380 that has been listed here previously and it is available through Amazon.\nI saved a few bucks by ordering from Amazon themselves as I was just stocking spares. It took them a month to get the first one and the second one is due here Monday. Others sellers also have them for about 20 bucks more but they are in stock.\n\nhttps://www.amazon.com/gp/product/B001BFTVBW/re ... UTF8&psc=1

Offline
Regular Member
Regular Member
Posts: 19
Joined: Fri Jun 26, 2015 11:48 am
Travco Model: 270

Re: Part#s Sticky

Unread post by kingdome627 » Fri Jun 23, 2017 1:02 pm

I know this thread is old, but I never saw a post that Definitively says that the Centric 130.83006 master cylinder will work on Late M375 chassis. MY 1972 Dodge Travco. \n The casting on the new master is 30042-C. The only difference I see is that the Front port will need a 1/2" to 7/16" adapter. (I saw a thread where someone paid $400+ dollars from Alretta that had this exact casting with the adapter) I paid $180. I am installing it this weekend and i'll report back if it works. \n Sean
You do not have the required permissions to view the files attached to this post.

Offline
Regular Member
Regular Member
Posts: 19
Joined: Fri Jun 26, 2015 11:48 am
Travco Model: 270

Re: Part#s Sticky

Unread post by kingdome627 » Fri Jun 30, 2017 1:12 pm

The Brakes seem to be working fine after replacing the new master cylinder rod with the old one. So the Centric part # is correct for the M375 late chassis.

Offline
Senior Contributor
Senior Contributor
Posts: 135
Joined: Sun Dec 24, 2017 1:37 pm
Travco Model: 1972 270

Re: Part#s Sticky

Unread post by rjsdotorg » Fri Apr 06, 2018 4:08 pm

Was looking for exact rear inner seal for 71 axle on the m375\nI called Rancho Chrysler, and they had the old books!\nOEM# 2914518, used 1967 to 1980\n\nTimken National Seals 456648\nNitrile Oil Seal - 45 Design, Single Lip with Spring, 3.3125 in Shaft, 4.5060 in OD, 0.4690 in Width\n\nthe SKF 33136 is a little thinner, but would be OK\nSKF Sealing Solutions 33136\nNitrile Oil Seal - CRWH1 Design, Single Lip with Spring, 3.3125 in Shaft, 4.5000 in OD, 0.4375 in Width\n\nDave's has the same OEM under M500 at\nhttp://dave78chieftain.com/DodgeHdw.htm\n\nnat 4566498 is the same dimensions as 415085 (listed at Oreilly), which has double lip for dust resistance\nhttps://shop.advanceautoparts.com/.../national.../18443326-P\nand is what I ordered.

Offline
Senior Contributor
Senior Contributor
Posts: 135
Joined: Sun Dec 24, 2017 1:37 pm
Travco Model: 1972 270

Re: Part#s Sticky

Unread post by rjsdotorg » Sat May 26, 2018 10:54 am

FYI, I posted a PDF of much of the 69-74 parts catalog in \nhttp://www.travcoforum.com/download/file.php?id=2454

Post Reply

Return to “Brakes”