tie rod end part numbers etc.

Roadrash · Unread post by **Roadrash** » Wed Apr 10, 2013 3:39 pm

Does anyone know where to buy new tie rod ends for an RM400 chassis, 1974 270? Also the draglink?

rcb · Unread post by **rcb** » Thu Apr 11, 2013 3:40 pm

Have you tried NAPA yet?\n\nUnder R400, I did find this. I don't know how similar or not they are.\n\nhttp://www.napaonline.com/Catalog/Result.aspx? ... Ne=2000000

Roadrash · Unread post by **Roadrash** » Thu Apr 11, 2013 5:00 pm

Thanks for that. I've found several similar listings but none are specifially listed for my chassis. I suspect that they are all the same though. I'll just have to buy some and see if they fit.

rcb · Unread post by **rcb** » Thu Apr 11, 2013 6:02 pm

You might give them a call. They have a lot of listings that aren't online. In fact, mine here can get a lot of construction and farm parts too.

Unread post by **Acesneights** » Thu Apr 11, 2013 8:37 pm

remember to have them look it up under Med/heavy duty.

Unread post by **Acesneights** » Fri Apr 18, 2014 7:09 pm

As per Datsit. Thanks.\nhttp://www.travcoforum.com/viewtopic.php?f=54&p=2159#p2159

tie rod end part numbers etc.

tie rod end part numbers etc.

Re: tie rod end part numbers etc.

Re: tie rod end part numbers etc.

Re: tie rod end part numbers etc.

Re: tie rod end part numbers etc.

Re: tie rod end part numbers etc.