Travco Classic Motorhome Support & Discussion Forum

Skip to content

Change font size

Board index » Interior » All other interior
Cabinets, Woodwork, flooring ideas Wall panels etc.

Refinishing a worn out shower stall

Unread postby gojoe on Thu Jul 19, 2018 9:48 am

Have cleaned up the old shower stall pretty well and removed most of the crummy resin repair done to the pan. I need to paint this thing. I've seen the fiberglass reglazing products by rustoleum and others. They are not recommended for wall refinishing. Has anyone had success with this or something else?
You do not have the required permissions to view the files attached to this post.
Contributing Member
Contributing Member
Posts: 29
Joined: Fri Jan 27, 2017 1:19 pm
Location: Hardware City 06053
Travco Model: 1973 m375/270

Re: Refinishing a worn out shower stall

Unread postby ontheroad on Mon Jul 23, 2018 8:40 pm

Did you get anything figured out? I had a shower repair guy come out and repair a fiberglass shower stall in our home a few years ago. Talking with the guy he used single stage urethane automotive paint. I was surprised to hear that. Come to think of it, it has been over ten years and it is still holding up... Let me know what info you come up with as mine is going to need the same before its usable. Thanks.
User avatar
Contributing Member
Contributing Member
Posts: 66
Joined: Sun Oct 02, 2016 1:48 pm
Location: Askov, MN
Travco Model: 76 270 2+2 & 76 270

Return to All other interior

Who is online

Users browsing this forum: No registered users and 1 guest