Floor Hole Behind Genset?

Cabinets, Woodwork, flooring ideas Wall panels etc.
Post Reply
Author
Message
Offline
Contributing Member
Contributing Member
Posts: 27
Joined: Mon Nov 24, 2014 12:40 pm
Travco Model: 1973 - 270

Floor Hole Behind Genset?

Unread post by padave29 » Tue May 03, 2016 10:57 am

Hey, guys, I notice I have a large opening to the ground, just aft of my genset - like maybe 12" x 24" or so. I'm assuming that's NOT by design, but maybe something a PO cut out(?) Do you guys have an opening back there? If so, is it for exhaust, or what? Thanks!

Offline
Contributing Member
Contributing Member
Posts: 88
Joined: Wed Aug 12, 2015 7:36 pm
Travco Model: 1971 270
Location: Southern California

Re: Floor Hole Behind Genset?

Unread post by Dodgy71 » Tue May 03, 2016 11:36 am

You might want to add a pic of your gen set compartment, as they are bit different between years and models. My 71 270 has a pretty open floor in the compartment due to rusting of thin sheet metal, and mine has lived in SoCal it's entire life!

Offline
Site Admin
Site Admin
Posts: 1816
Joined: Tue Jan 22, 2013 7:01 am
Travco Model: 1975 270,1974 220
Location: North East Ct

Re: Floor Hole Behind Genset?

Unread post by Acesneights » Tue May 03, 2016 6:52 pm

A large rectangular hole is by design. The original Onan blower vents out that hole.Not sure about 12x24 though. That sounds a little too big.
1977 Travco 270 Elite\n1974 Travco 220 Parts unit

Offline
Moderator
Moderator
Posts: 1247
Joined: Sat Jan 26, 2013 2:32 am
Travco Model:
Location: Kerrville, Texas

Re: Floor Hole Behind Genset?

Unread post by 77Travco » Thu May 05, 2016 4:09 pm

Here's a picture of my generator compartment. See the rectangle hole near the rear of the genset? Is that what you are talking about?
You do not have the required permissions to view the files attached to this post.

Post Reply

Return to “All other interior”