Stove hood vent filter (Aluminum mesh)

Post up here any parts you need or are looking for. Also if you know where something is that someone needs feel free to reply to that persons post.Also if you are looking for a Travco..
Post Reply
Author
Message
Offline
Senior Contributor
Senior Contributor
Posts: 629
Joined: Fri Feb 21, 2014 10:32 am
Travco Model: 270
Location: Ohio

Stove hood vent filter (Aluminum mesh)

Unread post by badbillybiker » Sun Apr 09, 2017 4:27 pm

Noticed mine was gone... the PO had removed itt. \n1974-270 \nRoughly 10x10x1/8 or 1/4" thick.\nLooks like the brand name on the hood is STRAWSINE.\nAnyone have a spare one they want to off????\nThanks...\nBBB \n04/09/17

Offline
Regular Member
Regular Member
Posts: 17
Joined: Wed Aug 17, 2016 2:53 pm
Travco Model: Mahal 2+2

Re: Stove hood vent filter (Aluminum mesh)

Unread post by dodgetimes2 » Wed Apr 12, 2017 12:47 pm

Might have luck here, http://www.hoodfilterfactory.com/ Assuming you're looking for the grease filter thingie.

Offline
Site Admin
Site Admin
Posts: 1233
Joined: Wed Nov 19, 2014 2:26 pm
Travco Model: 76 Mahal 2+2
Location: Arnoldsville GA
Contact:

Re: Stove hood vent filter (Aluminum mesh)

Unread post by KB2CRK » Wed Apr 12, 2017 3:30 pm

I could use one of those.....

Offline
Senior Contributor
Senior Contributor
Posts: 629
Joined: Fri Feb 21, 2014 10:32 am
Travco Model: 270
Location: Ohio

Re: Stove hood vent filter (Aluminum mesh)

Unread post by badbillybiker » Wed Apr 12, 2017 6:33 pm

At this time they are closed... Wiill call tomorrow. Might be the place for the correct unit. \nI just ordered and recieved a NUTONE ALUMINUM hood vent filter #27862 range kitchen\nstove replacement. After I got it , it was all wrong dims, So,, do not order a nutone..\nnot worth sending back....Always looking for part numbers... \nWill keep on until i get it right...\nThanks DODGETIMES2\nBBB

Post Reply

Return to “Want to Buy”