Wanted: 318 Poly exhaust manifolds for our 1967 270

Post up here any parts you need or are looking for. Also if you know where something is that someone needs feel free to reply to that persons post.Also if you are looking for a Travco..
Post Reply
Author
Message
Offline
New Member
New Member
Posts: 3
Joined: Fri Jun 26, 2015 3:00 pm
Travco Model: 270
Location: West Chester, PA

Wanted: 318 Poly exhaust manifolds for our 1967 270

Unread post by brunocolumban » Thu Aug 27, 2015 1:22 pm

Wanted: 318 Poly exhaust manifolds for our 1967 270\nOur 270 came to us with a broken RH exhaust manifold, and one brazed/repaired RH manifold under the couch. It's not very pretty to say the least. We were able to swap them out, but I don't trust the repaired one to last very long. The center drop tube is shorter than a standard Chrysler poly manifold, and quite specific to Dodge trucks. I see someone in Australia is making new ones, but they're pricey. Anyone have any spares? I've got a few calls into truck salvage yards, but always best to search far and wide. Thanks!!!\n\n
old manifold.jpg
\n\n
brazed manifold.jpg
You do not have the required permissions to view the files attached to this post.

Offline
Site Admin
Site Admin
Posts: 1782
Joined: Tue Jan 22, 2013 7:01 am
Travco Model: 1975 270,1974 220
Location: North East Ct

Re: Wanted: 318 Poly exhaust manifolds for our 1967 270

Unread post by Acesneights » Sun Aug 30, 2015 9:16 pm

Did you try eBay ? There was a couple guys on there selling reproduction ones.
1977 Travco 270 Elite\n1974 Travco 220 Parts unit

Post Reply

Return to “Want to Buy”