tank sending unit

Post here for engine related Discussion
Author
Message
Zed
Offline
Contributing Member
Contributing Member
Posts: 85
Joined: Fri Aug 12, 2016 12:58 am
Travco Model: 270 Mahal

Re: tank sending unit

Unread post by Zed » Sat Aug 27, 2016 1:11 pm

I tested my OEM sender, and it does something amazingly. It was crusted with some sort of rust scale, I cleaned it up as best I could but whatever is on it it a thick buildup of rust and something that is difficult to remove. I put it on a multi meter and I got a steady reading at empty but it bounced all over the place at full, and neither reading is what I expected given my best info is 15 ohms empty and 73 ohms full IIRC. It still reads different readings depending on the arm position but the bouncing all over the place and incorrect readings makes me think its shot. Going to order the ISSPRO replacement unit I guess. \n\nhttps://imgur.com/a/b2a9j

Post Reply

Return to “Engines”