Stove hood vent filter (Aluminum mesh)
Author
Message
- Offline
- Senior Contributor
- Posts: 629
- Joined: Fri Feb 21, 2014 10:32 am
- Travco Model: 270
- Location: Ohio
Stove hood vent filter (Aluminum mesh)
Noticed mine was gone... the PO had removed itt. \n1974-270 \nRoughly 10x10x1/8 or 1/4" thick.\nLooks like the brand name on the hood is STRAWSINE.\nAnyone have a spare one they want to off????\nThanks...\nBBB \n04/09/17
- Offline
- Regular Member
- Posts: 17
- Joined: Wed Aug 17, 2016 2:53 pm
- Travco Model: Mahal 2+2
Re: Stove hood vent filter (Aluminum mesh)
Might have luck here, http://www.hoodfilterfactory.com/ Assuming you're looking for the grease filter thingie.
- Offline
- Site Admin
- Posts: 1233
- Joined: Wed Nov 19, 2014 2:26 pm
- Travco Model: 76 Mahal 2+2
- Location: Arnoldsville GA
- Contact:
Re: Stove hood vent filter (Aluminum mesh)
I could use one of those.....
- Offline
- Senior Contributor
- Posts: 629
- Joined: Fri Feb 21, 2014 10:32 am
- Travco Model: 270
- Location: Ohio
Re: Stove hood vent filter (Aluminum mesh)
At this time they are closed... Wiill call tomorrow. Might be the place for the correct unit. \nI just ordered and recieved a NUTONE ALUMINUM hood vent filter #27862 range kitchen\nstove replacement. After I got it , it was all wrong dims, So,, do not order a nutone..\nnot worth sending back....Always looking for part numbers... \nWill keep on until i get it right...\nThanks DODGETIMES2\nBBB